600 lbs Magnetic door locks with RF wireless transmitter and receiver buzz-in kits - FPC-5170

Indoor Maglock Installation (VIS-ML300LED, VIS-ML600LED, VIS-ML1200LED) - FPC Security

Mini controller for wiegand standalone keypad access control - VIS-MINI-CNTRL

Mini controller for Wiegand card readers and keypads - VIS-MINI-CNTRL Visionis

1 door controller for stand alone card reader dimensions - VIS-MINI-CNTRL

Waterproof keypad and card reader VIS-3000 Visionis

Outdoor standalone keypad and card reader VIS-3000 Visionis

Security Access Control Keypads Visionis VIS-3000

600lb Indoor Magnetic Lock with LED Sensor VIS-ML600LED

Dimensions 600lb Indoor Magnetic Lock with LED Sensor VIS-ML600LED

Seco-larm SK-910R3Q - 3-Channel Receiver 315mhz 11-24 VAC/DC

Seco-Larm SK-919T2-GNQ 315MHz Pendant RF Transmitter with 2 Button, 3 Channel

Dimensions green push to exit button - Visionis VIS-7000

This PRODUCT has a 3 YEAR warranty with full access to tech support in the USA!

Kit Includes:

(3)

(1)

(2)

(3)

(7)

VIS-ML600LED: 600lbs Indoor Electromagnetic Lock with LED Sensor

VIS-MINI-CNTRL: 1 Door Controller for Access Control Systems with No Software. Up to 1,000 users

SK-910R3Q: 3-Channel Receiver 315mhz 11-24 VAC/DC

SK-919T3-GNQ: 3-Buttons, 7-Channels RF Transmitter, Pendant, 315MHz

VIS-7000: Green Square Push to Exit Button for Door Access Control with LED Light, NC, COM and NO Outputs

VIS-CP200: 12 Volt 2Amp Power Supply Transformer, UL Listed

Description

Kit Three Door Access Control for Outswinging Door. Magnetic Locks 600 lbs (272 kg) + Outdoor Keypad Reader Standalone With Mini Controller + Push To Exit Button + Receiver + 2 Remotes - FPC-5170

Characteristics

Model VIS-ML600LED:

Voltage Input: 12 VDC / 24 VDC
Current Draw: 12V / 500mA ; 24V / 250mA (±5%)
Holding Force: Up to 600 lbs (272 kg)
Hall Effect Contact: SPDT rated 2A at 24 VDC
Magnetic Contact Rating: 28 VDC, 0.5A, 10W
Anti-Rust Surface Treatment: Blue Zinc Plating
Operating Temperature: 0~55° C (32~131° F)
Weight (Magnet): 1.1 kg (±1%)
Dimensions: Magnet - (L)250x(W)42x(T)25 mm Armature - (L)180x(W)38x(T)11 mm
Green/Red LED Indication for EM Lock Status

Model No. VIS-MINI-CNTRL:

User Capacity: 1,000 (Common user: 989, Visitor user: 10, Authorized user: 1)
Operating Voltage: 12V DC
Idle Current: < 100mA
Active Current: < 150mA
Wiring Connections: Relay output, exit button, Wiegand input
Relay: One (NO, NC, Common)
Adjustable Relay Output Time: 0~99 Seconds (5 seconds default)
Lock Output Load: 2 Amp Maximum
Wiegand Interface: Wiegand 26~44, 56, 58 bits
Operating Humidity: Indoor
Environment: 0 ~ 90%RH
Physical: ABS Shell
Dimensions: L65 x W54 x H19 (mm) - L2.56 x W2.13 x H0.75 (in.)
Unit Weight: 40g
Shipping Weight: 100g

Model SK-910R3Q:

Operating Frequency: 315MHz (433.92MHz also available by request)
Operating Voltage: 11~24V AC/DC
Operating Distance: Up to 500′ (150m)*
Operating Temperature: -4º~162º F (-20º~72º C)
Current Drain: ~12mA@12VDC (standby), 50mA@12VDC per channel activated
Sensitivity: -87dBm (typical)
Data Format: PWM
RF Codes: 18 quintillion, for ENFORCER CODEBUMP remotes. 68 billion, for ENFORCER fixed-code remotes
Coded Channels: Three
Number of Stored Transmitter Codes: 15 per channel, 45 per receiver
Receiver Outputs: Three Form “C” dry relay contacts (NO/NC/COM); rated 10A@24VDC
Receiver Output Modes: Programmable independent outputs: timed momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.), toggle (ON/OFF), latched, continuous
Case Construction: High-impact ABS plastic
Size: 55/16″x315/16″x11/8″ (135x100x27.5 mm)
Weight: 3.5-oz (100g)

Model SK-919T3-GNQ:

Type: 3-Button RF Transmitter with 68 billion codes
RF Frequency: 315MHz
No. of Buttons: 3
Channels: 7
IP Rating: Weatherproof IP66
No. of Codes: 68 billion possible codes
Dimensions: 1-1/4″x2-3/16″x5/16″ (31.5x55x8 mm)

Model No. VIS-7000:

Output Contact: NC, COM, NO
Power: 12 VDC / 24 VDC
LED Indicator: Green LED (Standby)
Mechanical Life: 500,000 tests
Panel Hole Diameter: 25mm
Panel: Stainless steel 0.9mm thickness
Switch Material: Plastic
Operating Temperature: -20°C~+55°C (-4°F-131°F)
Operating Humidity: 0-95% (relative humidity)
Dimension Of Plate: 115L × 70W × 70H mm - 4.52L x 2.75W x 2.75H in.
Weight: 0.118kg
Attention: This exit button is meant for indoor use. This Exit button does not have a delay.

Model No. VIS-CP200:

Cable Length: 1.2 meters (4 feet)
Input Voltage Range: AC90V-264V
Input Frequency Range: 50Hz-60Hz
Output Voltage Range: DC12V+/-5%
Output Current: 2A
Output Power: 24 Watts
Output Ripple&Noise: ≤46MV
Output Efficiency: ≥79%
Environment Operating: -30°C~45°C 20%~90%RH
Environment Storage Temp.: -40°C~85°C 10%~95%RH
Product Dimension: 87*36.5*70mm (3.42x1.43x2.75in.)
Product Weight: 116g
Certificate: UL, CE, RoHS, FCC

Description

Kit Three Door Access Control for Outswinging Door. Magnetic Locks 600 lbs (272 kg) + Outdoor Keypad Reader Standalone With Mini Controller + Push To Exit Button + Receiver + 2 Remotes - FPC-5170

Download Datasheets and Manuals of this product

VIS-ML600LED

VIS-3000

VIS-MINI-CNTRL

SK-910R3Q

Datasheet

VIS-7000

LET US HELP YOU WITH YOUR PURCHASE

Feel free to contact our dedicated support team if you have any questions or if you're ready to place an order.

I Need Help

Visionis by Visionis

Kit Three Door Access Control for Outswinging Door. Magnetic Locks 600 lbs (272 kg) + Outdoor Keypad Reader Standalone With Mini Controller + Push To Exit Button + Receiver + 2 Remotes - FPC-5170

Translation missing: en.products.product.sku:FPC-5170

UPC Code: 701980451478 Weight: 20.0 lb

Regular price: $693.43
Sale price: $693.43
Regular price

Shipping calculated at checkout.

In Stock

Quantity:

Phone Life-Time Technical Support

30-Day No Questions Return Policy

*Free Shipping within the USA

Contact an Expert

Order Before 3:00pm EST on a week day and your order will be shipped out the same day

*Free shipping within the USA

Including Puerto Rico, Hawaii and Alaska

ATTENTION:

Before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes. We are not responsible for the improper installation of our product(s) or any type of fees that can be incurred by not complying with your local fire authority.